10 Methods To Fix Android Boot Loop

With Android boot loop errors, there will be no sign of the device starting up as normal. The phone will turn on and show the manufacturer logo, but then it will shut off and restart itself repeatedly. This can be a frustrating experience because you’ll never get past the manufacturer’s logo. If your Android device has a boot loop problem, there is something wrong with the operating system.

There are two main types of Android boot loops: soft brick and hard brick. Soft brick is when your device gets stuck in a boot loop after a firmware update or during the rooting process. Hard brick is when your phone no longer boots up and is unresponsive to any button presses.

You can try a few things to fix the issue on Android devices. We will go over 10 proven successful methods in fixing boot loops.

1. Remove the Phone Case

Although this step looks very easy, it could solve your issue. The protective case of your phone may protect it from dirt, but it also delays the phone’s ability to cool down the overheated gadget quickly, which leads to Android being struck during the boot Animation.

Remove your phone’s protective case and check if it could solve your problem.

2. Plug Into An Electric Wall Source

It might look like an unimportant step, but it often resolves the issue. So make sure your Android device has enough power. Then connect it to a wall outlet. It might now need to be left plugged in for a short while. In the end, plug it into an electric wall source.

3. Soft Reset your Android Phone

This turning off your device may seem like a home remedy, but it frequently resolves the issue and works. The phone gets a new start after a soft reset, which could help you fix the boot loop problem.

Follow the given steps to soft reset the device:

  • Turn off your phone and take out the phone’s battery.
  • Wait for some time, and then put the battery off. It only works if your phone has a removable battery.
  • If you cannot remove the battery, turn off the phone for three to five minutes before turning it back on.

Fix Android Boot Loop

4. Force Restart Your Device

If other steps do not fix the issue and your phone keeps rebooting, you could try to force a reboot of your Android. To restart your phone forcefully, Press and Hold both the ‘Power’ and ‘Volume down’ keys for 20 seconds and wait until the device reboots. This step often clears the memory, and the phone typically starts, so it should also fix your issue.

5. Remove the Phone’s SD Card

Sometimes corrupted or unwanted files on Android phones can result in a reboot loop. So to find out if the SD card is the cause of this issue, remove the card and turn on your mobile phone. And if the phone turns on without any case, then your SD card might be the problem, and you should replace it with a new one.

6. Reboot System in Recovery Mode

Many faults and issues on your Android phone can be fixed by restarting it in recovery mode. Therefore, restart your phone in recovery mode if you cannot start it traditionally or if your Android is stuck in a reboot loop.

recovery mode

7. Enabled Safe Mode on Android Phone

Android OS has a function called Safe Mode, which solves issues with configuration incompatibilities. Only system core apps will load when the device restarts in this mode while disabling all third-party apps on the Android. This will help you to figure out if this is the reason behind your problem.

To do this, follow these steps:

  • Reboot your Phone.
  • Long-press the volume-down button while the device logo appears on the screen.
  • After that, your phone will automatically enter into Safe mode.

Now, if your phone is not stuck in the boot loop anymore, one of the third-party apps you loaded on it must have been the root of the problem. To identify the faulty app and remove it.

8. Factory Reset Your Android Phone

If the steps mentioned above could help and you are still stuck on the problem to fix your phone’s android boot loop, then another way could be to factory reset. This method is used to wipe all settings and data of your phone. But at the same time, it also fixes several problems. Before going further with this method, ensure you have a backup of all the data on your mobile phone. However, you may access most of your data if your Google account is active on your device.

Follow these steps to factory reset your mobile device:

  • Turn off the phone.
  • Press and hold the Power and Volume Up buttons when the device appears.
  • Then the Android system recovery screen shows up.
  • Choose Wipe data/factory reset from the menu. (Use the Power button to select the choice and the Volume buttons to navigate.)
  • Click yes on the following prompt screen.
  • Once the factory reset procedure is complete, click the Reboot system now option.

When you complete these steps, check if the problem still exists.

9. Use CWM Recovery

Maybe you could not be aware of this technique, but it’s pretty helpful in fixing the android boot loop. CWM stands for Clockwork Mod, a well-known custom recovery system. to use this method, your Android phone must be rooted with CWM Recovery System, meaning CWM must be downloaded and set up on your mobile phone to fix the problem.

Use these given steps to use CWM Recovery:

  • To open the CWM Recovery screen, simultaneously press the home, power, and Volume up buttons.
  • Using the volume key, scroll down and choose “Advanced.”
  • Now click “Wipe” and select “Dalvik Cache” to be deleted.
  • Then choose “Mounts and Storage” to click “Wipe” or “Cache.”

when you complete these steps, make sure to reboot your Android mobile.

This process will help to fix the error without any data loss. However, it is essential to note here that while entering the Recovery Mode, you have to use a different set of keys depending on the model of your device.

CWM Recovery

10. Wipe Cache Partition

Another helpful method to eliminate this issue could be to wipe the cache partition in recovery mode. It would not cause any loss of data from your device.

Follow the below steps to wipe the cache partition:

  • The first step is to switch off your Android phone.
  • Now reboot your device into the Recovery Mode by pressing and holding the Power, Volume Up, and Down buttons.
  • Then choose the Recovery Mode menu.
  • After that, click the wipe cache partition option with the Power button.
  • Wait for a few minutes to clear the cache partition.
  • In the last step, select the reboot option.

Also Check: 10 Solutions To Fix Web Proxy Not Responding


With all of these possible solutions to your Android boot loop problem, there is no reason not to try and fix it yourself! You may be surprised at how easy it is to get your device up and running again. Just remember to take a backup of your data before you start so that you can restore it if something goes wrong. Good luck!


Leave a Comment